How to Connect Wired Speakers to Bluetooth

If you’re looking to add some better sound quality to your home audio setup, or just want the freedom to move around without wires getting in the way, then connecting your wired speakers to Bluetooth is a great option. Here’s a step-by-step guide on how to do it. First, you’ll need a Bluetooth transmitter that’s compatible with your speakers.

There are a few different types on the market, so make sure you do your research before making a purchase. Once you have your transmitter, all you need to do is plug it into an audio source (like your TV or stereo receiver) using an AUX cable, and then pair it with your Bluetooth speaker. That’s it!

Now you can enjoy superior sound quality without any pesky wires getting in the way.

  • Connect your wired speakers to the 3
  • 5mm audio input on the Bluetooth transmitter
  • Plug the Bluetooth transmitter into a power outlet using the included USB cable
  • Press the “Pair” button on the Bluetooth transmitter
  • Enable Bluetooth on your device and select the “TaoTronics TT-BA01” from the list of available devices
  • Play audio from your device through your wired speakers!

How To Make Wired Speakers Wireless: Two Takes

Can Wired Speakers Be Converted to Bluetooth?

Yes, wired speakers can be converted to Bluetooth. There are a few ways to do this, but the most common is to use a Bluetooth adapter. A Bluetooth adapter is a small device that plugs into the AUX port of your speaker (the port that you would normally plug a headphone jack into).

Once the adapter is plugged in, it will establish a Bluetooth connection with your phone or other audio source and stream audio wirelessly to the speaker. There are many different types and brands of Bluetooth adapters, so it’s important to do your research before purchasing one. Some factors you may want to consider include: compatibility with your speaker, range, battery life, and whether or not it supports aptX HD (a high-quality codec for streaming Bluetooh audio).

How Do You Connect Old Speakers to Bluetooth?

There are a few ways that you can connect old speakers to Bluetooth, and which method you use will depend on the type of speaker that you have. If your speakers are not already Bluetooth-enabled, then you will need to purchase a Bluetooth adapter in order to connect them wirelessly. Once you have the adapter, simply plug it into the audio input of your speakers and then pair it with your device.

If your speakers are already Bluetooth-enabled, then the process is even simpler. Just put your speakers into pairing mode and then select them from the list of available devices on your phone or other Bluetooth device. Once they are paired, you should be able to stream audio wirelessly to your speakers without any issues.

How Do I Convert Wired Speakers to Wireless Speakers?

If you’re looking to cut the cord and go wireless with your home audio setup, you might be wondering how to convert your wired speakers to wireless. The good news is, it’s actually pretty easy to do. All you need is a wireless receiver and some speaker wire.

Here’s a step-by-step guide on how to make the switch: 1. Start by disconnecting your speakers from their current amplifier or receiver. 2. Next, connect the wireless receiver to the amplifier or receiver using speaker wire.

3. Once everything is connected, turn on the power to both the amplifier/receiver and the wireless receiver. 4. You should now be able to pair your Bluetooth-enabled device with the wireless receiver, and stream audio through your speakers without any wires!

Can You Use Wireless And Wired Speakers Together?

If you want to create an audio setup that provides the best possible sound quality, using a combination of wired and wireless speakers is often the way to go. While it’s possible to get good quality sound from either type of speaker on its own, using a mix of both can give you even better results. One advantage of using wireless speakers is that they can be placed in locations where it’s not possible to run wires.

This can be helpful if you want to put speakers in different rooms or outside, for example. Wireless speakers also tend to be more portable than their wired counterparts, so they’re easier to take with you when you travel. On the other hand, wired speakers typically offer better sound quality than wireless models.

They also don’t require batteries or need to be recharged, so there’s less hassle involved in using them. And since they’re hardwired into your audio system, they’ll continue working even if your power goes out. So which type of speaker is right for you?

Ultimately, it comes down to personal preference and what your needs are. If portability and placement flexibility are most important to you, then wireless speakers are probably the way to go. But if sound quality is your top priority, then wired speakers are worth considering.

How to Connect Wired Speakers to Bluetooth


How to Convert Wired Speakers to Wireless

If you’ve got a great set of wired speakers that you love, but you’re looking to cut the cord and go wireless, there’s good news! It’s actually pretty easy to convert most wired speakers into wireless ones. Here’s how:

First, you’ll need to purchase a wireless audio transmitter. There are a variety of these on the market, so do some research to find one that will work with your particular set of speakers. Once you have the transmitter, simply plug it into the audio output on your TV, computer, or other device.

Then pair it with a wireless receiver (this is usually built into the speaker itself) and you’re good to go! There are a few things to keep in mind when converting your speakers to wireless. First, because they are now receiving a digital signal instead of an analog one, sound quality may be slightly degraded.

Additionally, depending on the strength of your wireless signal, there may be occasional dropouts or interference. However, overall this is still an easy and affordable way to enjoy the convenience of wireless streaming without having to give up your beloved wired speakers!


If you want to connect your wired speakers to a Bluetooth device, there are a few things you need to do. First, make sure that your Bluetooth device is compatible with your speakers. Next, find the audio input on your speakers and plug in the appropriate cable.

Finally, turn on your speaker’s Bluetooth function and pair it with your device.