How to Connect Turntable to Speakers

If you’re a vinyl fan, you know there’s nothing quite like the sound of your favorite record spinning on a turntable. But how do you get that sweet analog sound coming out of your speakers? Connecting a turntable to speakers can seem daunting, but we’ll walk you through the process step by step.

All you need is a little patience and the right equipment. First, let’s take a look at the basics of connecting a turntable to speakers. You’ll need two things: an amplifier and some speaker wire.

The amplifier provides power to the turntable and boosts the signal so it can be sent to the speakers. The speaker wire carries that amplified signal from the amp to the speakers. Most amplifiers have RCA inputs, which is what most turntables use for output.

If your amp doesn’t have RCA inputs, don’t worry – we’ll cover that later on.

  • Place your turntable on a stable surface near your speakers
  • Connect the power cord from your turntable to an outlet and plug it in
  • Connect the audio cable from your turntable to the input on your speakers
  • Turn on your turntable and speakers
  • Adjust the volume on your speakers to a comfortable level
How to Connect Turntable to Speakers


Can I Connect My Turntable Directly to Speakers?

If you want to get the most out of your vinyl records, you need to connect your turntable directly to speakers. This will ensure that the audio signal is not degraded in any way and that you can enjoy all the nuance and detail that your records have to offer. There are a few different ways to do this, depending on what type of speakers you have.

If you have active (powered) speakers, then you can simply connect your turntable’s output directly to the speaker’s input using a standard RCA cable. If your speakers are passive (unpowered), then you’ll need to connect your turntable to an amplifier or receiver before connecting it to the speakers. Either way, once everything is properly connected, all you need to do is cue up your record and enjoy the music!

What Cord Do I Need to Connect Turntable to Speakers?

If you want to connect your turntable to speakers, you’ll need a phono preamp and an RCA cable. The phono preamp will amplify the signal from your turntable and the RCA cable will carry that signal to your speakers. If your turntable has a built-in phono preamp, then you can just use an RCA cable.

Otherwise, you’ll need to buy a separate phono preamp.

Why Wont My Speakers Work With My Turntable?

There are a few reasons why your speakers might not be working with your turntable. The first thing you should check is whether or not the speakers are properly plugged into an outlet and the correct input on your receiver. If they are, then the next step is to check your receiver’s settings.

Make sure that the receiver is set to “phono” rather than “line.” If it is set to “line,” then the signal from the turntable will be too weak for the receiver to amplify properly. Finally, make sure that all of the cables between your components are securely connected.

Loose connections can sometimes cause sound problems. If you’ve checked all of these things and your speakers still aren’t working, then it’s possible that there is something wrong with either the turntable or the speakers themselves. Try swapping out the component that isn’t working with a different one to see if that solves the problem.

If not, then you may need to take your equipment to a professional for diagnosis and repair.

Do You Have to Connect Turntables to Speakers?

No, you don’t have to connect turntables to speakers. You can use any type of audio output device, including an amplifier, receiver, or powered speakers.

Connect Turntable to Speakers Without Receiver

If you want to get the most out of your turntable, you need to connect it to a receiver. But what if you don’t have a receiver? Can you still enjoy your music?

The good news is that you can still connect your turntable to speakers without a receiver. There are a few different ways to do this, and we’ll go over each one so you can choose the best option for your setup. The easiest way to connect your turntable to speakers without a receiver is by using an RCA to 3.5mm cable.

Simply plug the RCA end into your turntable and the 3.5mm end into any powered speaker with a 3.5mm input. This will work with both active and passive speakers. If you want to use passive speakers, you’ll need an amplifier.

You can either get a stand-alone amplifier or use one that’s built into your powered speakers. Either way, just connect the amplifier to your turntable and then hook up your passive speakers. Finally, if you want the ultimate listening experience, you can use a dedicated phono preamplifier .

This will provide power and amplification specifically for your turntable so you can get the best sound possible out of it. Just connect the phono preamp to your turntable and then plug it into any power outlet or speaker system . So there you have it!

Three different ways to connect your turntableto speakers without using a receiver . Choose the option that best suitsyour needs and enjoy enhanced audio quality when spinning vinyl records .

How to Connect Turntable to Amplifier

If you want to start listening to vinyl records, you’re going to need two things: a turntable and an amplifier. Many people think that connecting a turntable to an amplifier is difficult, but it’s actually pretty simple. Here’s how to do it:

First, take a look at the back of your amplifier. You’ll see a bunch of different inputs, including ones for CD players, radios, and so on. One of these inputs will be labeled “phono.”

That’s the one you want to use for your turntable. Next, take a look at your turntable. It will have a similar array of outputs on the back.

One of these will be labeled “phono” as well. Connect the phono output on your turntable to the phono input on your amplifier using an RCA cable. Now all you have to do is turn on your amp and Turntable and start enjoying your music!

How to Connect Record Player to Bluetooth Speakers

In order to connect your record player to Bluetooth speakers, you will need to purchase a Bluetooth transmitter. Once you have done so, follow these simple steps: 1. Connect the Bluetooth transmitter to your record player.

2. Turn on the Bluetooth transmitter and put it into pairing mode. 3. Turn on your Bluetooth speaker and put it into pairing mode as well. 4. The two devices should now be paired and you should be able to hear the music from your record player through your Bluetooth speaker!

How to Connect Audio-Technica Turntable to Speakers

If you’re looking to get the best sound quality out of your audio-technica turntable, you’ll want to make sure it’s properly connected to your speakers. Here’s a quick guide on how to do just that: 1. Start by connecting the turntable’s power cord to an outlet and plugging in your speakers’ power cords as well.

2. Next, take the RCA cable that came with your turntable and connect one end to the “PHONO” output on the back of the turntable. Then, connect the other end of this cable to either the “AUX IN” or “LINE IN” input on your speakers (depending on which input they have). 3. If your speakers have separate left and right inputs, be sure to match up the colors accordingly (red goes to red, white goes to white).

4. Now all you need to do is turn on both your turntable and speakers, select the proper input source on your speaker(s), and enjoy!


If you want to start playing vinyl records but don’t know how to connect your turntable to speakers, this guide is for you. First, you need to connect the audio output of your turntable to the audio input of your amplifier or receiver using a stereo RCA cable. If your amplifier doesn’t have an audio input, you can use a phono preamp to convert the signal from your turntable into a line-level signal that can be connected to an audio input.

Once you’ve connected the Turntable and Speakers, turn on your amplifier and set the volume to a moderate level. Then, cue up your record and lower the tonearm onto the record. When it’s time to stop playing the record, lift the tonearm and return it to its resting position.