In a world where we are constantly on the go, it is important to have technology that can keep up with our busy lifestyles. Bluetooth speakers are becoming increasingly popular because they allow us to take our music with us wherever we go. But what if you don’t have a Bluetooth speaker?
In this blog post, we will show you how to make regular speakers Bluetooth.
How to Convert any SPEAKER into BLUETOOTH SPEAKER for $5
- Purchase a Bluetooth audio receiver
- Plug the Bluetooth audio receiver into the 3
- 5mm AUX input on your speaker system
- Pair your Bluetooth device with the Bluetooth audio receiver
- Adjust the volume on both the speaker system and your Bluetooth device to your desired level
How to Connect Bluetooth Receiver to Speaker
If you’re looking to add some wireless audio to your home theater or stereo system, you’ll need to connect a Bluetooth receiver. This guide will show you how to do just that, and get the most out of your new setup.
First, let’s make sure we’re on the same page about what a Bluetooth receiver is.
In short, it’s a device that allows you to wirelessly stream audio from another device – like your smartphone or tablet – to a speaker or set of speakers. It’s a great way to listen to music without having to deal with messy cables, and it can be used with any type of speaker system. Now that we know what we’re dealing with, let’s get started.
The first thing you’ll need to do is find a suitable location for your Bluetooth receiver. It should be close enough to your speakers so that the signal isn’t interrupted, but not so close that it gets in the way of other devices or cords. Once you’ve found the perfect spot, go ahead and plug in your receiver.
Next, take a look at the back of your stereo or home theater system and locate the “aux” input (it might also be labeled as “line in”). This is where we’ll be connecting our Bluetooth receiver. Using an aux cable (not included), connect one end to the “aux out” port on the back of your receiver, and then plug the other end into the “aux in” port on your stereo system.
If everything is plugged in correctly, you should see a blue light on your receiver – this means it’s ready to pair with another device.
How Do You Make a Simple Speaker Bluetooth Speaker?
If you’re looking to add Bluetooth functionality to a speaker, there are a few different ways you can go about it. One option is to buy a pre-made Bluetooth receiver, which can be easily connected to most any speaker. Alternatively, if you’re feeling a little more adventurous, you can build your own Bluetooth receiver using an Arduino microcontroller.
Here’s how to do both. To start, let’s look at how to use a pre-made Bluetooth receiver. These devices are relatively inexpensive and easy to find online or at your local electronics store.
Once you have your hands on one of these receivers, simply connect it to your speaker using an audio cable (3.5mm is the most common). Once everything is hooked up, power on both the receiver and your speaker, and then pair the two devices following the instructions that came with the receiver. In most cases, this will just involve putting the receiver into pairing mode and then selecting it from your phone or other device’s Bluetooth settings menu.
With everything paired up and working correctly, you should now be able to stream audio wirelessly from your device to your speaker! Building your own Bluetooth receiver is definitely more of an advanced project than simply buying one off the shelf. However, if you’re interested in learning how to do it yourself, here’s a quick overview of the process:
1) Start by soldering together all of the necessary components according to this schematic diagram: https://learn.sparkfun.com/tutorials/how-to-use-an-arduino/all#schematic 2) Download and install the Arduino IDE software onto your computer: https://www.arduino.cc/en/Main/Software 3) Connect your Arduino microcontroller board to your computer via USB cable
4) Open up the “Bluetooth Speaker” sketch from within the Arduino IDE (File > Examples > 05.”Communication”>BluetoothSpeaker) 5) Click “Upload” within the Arduino IDE to compile and upload the code onto your board 6) Once uploaded successfully, open up Serial Monitor within Arduino IDE (Tools > Serial Monitor)
7) Make sure that “Both NL & CR” is selected in dropdown menu at bottom right corner of Serial Monitor window 8) Type “AT+VERSION?” followed by Enter key; should receive back something like “OK+VERSION:1”.
How Do I Make My Regular Speakers Wireless?
If you’re looking to make your regular speakers wireless, there are a few different ways you can go about it. One option is to purchase a wireless speaker kit, which typically includes a transmitter and receiver that you’ll need to connect to your speakers and audio source respectively. Alternatively, you could also use a Bluetooth adapter, which will allow you to wirelessly stream audio from any Bluetooth-enabled device (like your smartphone or tablet) to your speakers.
Whichever route you decide to go, making your regular speakers wireless is relatively easy and should only take a few minutes to set up.
How Do I Add Bluetooth to My Existing Speakers?
Adding Bluetooth to your existing speakers is a great way to wireless stream audio from your favorite devices. There are a few different ways to do this, depending on the type of speaker you have. We’ll go over a few popular methods so you can choose the best option for your setup.
If you have an amplifier or receiver with an unused input, one of the easiest ways to add Bluetooth is with a Bluetooth receiver. These small devices plug into the AUX input on your amp and wirelessly connect to your device, allowing you to stream audio from it just like any other Bluetooth speaker. Many receivers also come with a microphone input so you can use them for hands-free calling, which can be convenient if your phone is connected to your speakers while you’re driving.
Another option is to use a dedicated powered speaker that has Bluetooth built-in. These are becoming increasingly popular as they offer a simple all-in-one solution for adding wireless streaming capabilities to any room in your home. Powered speakers typically have much better sound quality thanBluetooth receivers, so they’re worth considering if sound quality is important to you.
However, they can be more expensive and may not be compatible with some older stereo equipment. Finally, there are some high-end stereo components that come with built-in Bluetooth support. If you have one of these pieces of equipment, adding wireless streaming capabilities is as easy as pairing it with your device and pressing play.
However, these types of products are usually quite expensive and may not offer the same level of sound quality as dedicated powered speakers.
How Do I Convert Wired Speakers to Wireless Speakers?
If you’re looking to cut the cord and convert your wired speakers to wireless, there are a few different ways to do it. The most popular method is to use a Bluetooth adapter.
Bluetooth adapters come in a variety of shapes and sizes, but they all essentially do the same thing – they turn your wired speakers into wireless ones.
All you need to do is plug the adapter into your speaker’s AUX port (usually located on the back) and then pair it with your phone or other Bluetooth-enabled device. Once paired, you’ll be able to stream audio wirelessly from your device to your speakers. Another option for converting wired speakers to wireless is to use a Wi-Fi audio receiver.
These receivers connect to your speaker via an AUX cable just like Bluetooth adapters, but they utilize Wi-Fi instead of Bluetooth for streaming audio. That means you’ll need a router set up near your speaker in order for this method to work properly. But if you have good Wi-Fi coverage in your home, this can be a great way to go wireless without having to mess with any extra cords or adapters.
Finally, if you’re looking for a more permanent solution, there are some companies that make wireless versions of popular wired speakers. For example, Sonos offers several different models of its popular Play:1 speaker that come with built-in Wi-Fi and can be controlled via an app on your smartphone or tablet. If you don’t mind spending a bit more money upfront, this could be the best option as it will give you the full wireless experience without any extra hassle.
If you want to make your regular speakers Bluetooth, there are a few things you need to do. First, you need to buy a Bluetooth audio receiver. You can find these online or at your local electronics store.
Once you have the receiver, you need to plug it into your speakers using an aux cable. Then, you need to turn on the receiver and pair it with your phone or other device. Finally, set your device’s audio output to “Bluetooth” and enjoy your music!