How to Fix Speakers on Wall Without Drilling Holes

If your speakers are small enough, you can use velcro strips to attach them to the wall without drilling any holes. Just make sure the velcro is rated for the weight of your speakers. You can also buy special speaker mounts that don’t require drilling, but they may be more expensive.

If you do need to drill holes, make sure you use wall anchors that are rated for the weight of your speakers.

  • Unscrew the existing speaker from the wall
  • Use a stud finder to locate a stud in the wall
  • Mark the location of the stud with a pencil
  • Drill a hole through the drywall at the marked location
  • Insert a toggle bolt into the hole and screw it into the stud
  • Hang your speaker on the toggle bolt and screw it tight against the wall
How to Fix Speakers on Wall Without Drilling Holes


How Do You Hang Speakers Without Drilling Holes?

There are a few ways to hang speakers without drilling holes. The first is to use speaker stands. These are designed to support the weight of the speaker and keep it in place.

They typically have a base that sits on the floor and an arm that extends up to the speaker. The second way is to use wall mounts. These attach to the wall with screws or adhesive strips and support the speaker with brackets or hooks.

The third way is to use ceiling mounts. These also screw or adhere to the ceiling, but they suspend the speaker from above.

How Do You Secure Speakers to a Wall?

There are a few different ways that you can secure speakers to a wall. The most common way is to use speaker mounts. These mounts typically have a metal plate that goes against the wall, and then the speaker sits on top of or inside of the mount.

You can also find mounts that allow you to angle the speaker in different directions, which can be helpful if you’re trying to direct sound towards a specific area. Another option for securing speakers is to use adhesive strips. These work similarly to command strips and can hold a surprising amount of weight.

They’re also easy to remove if you need to take the speaker down for any reason. If you’re looking for a more permanent solution, you can always drill holes into the wall and screw the speaker directly into place. This obviously isn’t an option if you’re renting or don’t want to damage your walls, but it’s definitely the most secure way to keep your speakers in place.

How Do You Stick Small Speakers to a Wall?

If you’re looking to add some extra oomph to your home audio setup, you might be considering mounting small speakers to your walls. But how exactly do you do that? There are a few different ways to mount small speakers to a wall, depending on the speaker’s design and your desired aesthetic.

The most common method is using screws and wall plugs, which will provide a secure and permanent connection. Another option is adhesive strips or pads, which offer a more temporary solution (though they can still be quite strong). And finally, there are magnetic mounts, which use magnets to attach the speaker to the metal plate on the wall (these are usually only suitable for smaller speakers).

Whichever method you choose, make sure to follow the instructions that come with your particular speaker model for best results. With a little bit of effort, you’ll have those tiny speakers attached to your wall in no time!

Can You Mount Something Without Drilling?

There are a few ways to mount something without drilling. One way is to use adhesive hooks. Adhesive hooks come in a variety of sizes and can hold different amounts of weight, so be sure to choose the right size for your project.

Another way is to use velcro strips. Velcro strips can also be found in various sizes and strengths, so again, be sure to choose the right size for your project. Finally, you can use Command strips.

These are similar to adhesive hooks but are specifically designed not to damage walls or other surfaces.

How to Mount Speakers Without Damaging Wall

Adhesive Speaker Mount

An adhesive speaker mount is a device that is used to attach a speaker to a surface. It is typically made of metal or plastic and has an adhesive backing that allows it to be attached to a wide variety of surfaces. Adhesive speaker mounts are available in a variety of sizes and shapes, and can be found at most electronics stores.


It’s easy to take your speakers for granted-until they stop working. If your speakers are on the wall and you’re not sure how to fix them without drilling holes, don’t worry! There are a few simple steps you can follow to get them back up and running in no time.

First, check the wires leading to your speakers. Make sure they’re all securely connected. If they’re not, gently tighten them until they are.

Next, take a look at the speaker itself. Is there any dirt or debris blocking the sound? If so, carefully remove it and see if that makes a difference.

If your speaker still isn’t working, there may be an issue with the audio input on your TV or other device. Try unplugging and replugging the audio cable into the appropriate port. This can sometimes jostle loose connections and fix the problem.

Finally, if none of these solutions work, you may need to call in a professional to help troubleshoot the issue further. In most cases, however, following these simple tips should do the trick!